==How to Setup Video Wall==
1. Begin by identifying your monitors based on what input they are connected to currently.
3 KB (359 words) - 21:44, 16 February 2016
==How to Splice One Feed Across Multiple Displays on the Video Wall==
*Multiple Displays connected to Server
1 KB (203 words) - 20:05, 21 June 2019
==How to Test Video In with PFM900==
*[[PFM900_How_To_Test_Video_In|How to Test Video In with PFM900]]
3 KB (439 words) - 02:39, 16 August 2016
==How to Test Record and Playback with PFM900==
*[[PFM900_To_IP_Camera_Video_Test|PFM900 to IP Camera (and PoE) Video Test]]
2 KB (255 words) - 21:09, 25 July 2016
==How to Test POE with PFM900==
===PFM900 to IP Camera (PoE) Video Test Instructions===
1 KB (206 words) - 21:08, 25 July 2016
==How to Test CAT5 Cable and Determine Cable Length with PFM900==
===PFM900 to Ethernet Cable Test Instructions===
2 KB (303 words) - 21:20, 25 July 2016
==How to Test Audio with PFM900==
* Supplied 3.5mm jack to dual alligator clips (red and black)
1 KB (149 words) - 21:20, 25 July 2016
==How to Test PTZ with PFM900==
136 bytes (17 words) - 03:00, 5 August 2016
==How to Scan Network with PFM900==
* Ethernet cable connected to network
2 KB (299 words) - 21:20, 25 July 2016
==How to Charge the PFM900==
c. (optional) plug your input data cord if you need to charge and also receive data over ethernet
1 KB (182 words) - 21:19, 25 July 2016
==PFM900 How to Test PTZ==
...DCVI PTZ please go to [[PFM900_To_HDCVI_Or_Analog_Camera_Video_Test|PFM900 to IP HDCVI or Analog Camera Video Test]]
466 bytes (75 words) - 21:18, 2 March 2016
=How to Connect Electronic Buzzer=
This Article will show you how to wire and setup an alarm output device to Dahua recorder.
5 KB (799 words) - 20:30, 1 August 2019
==How To Setup People Counting==
155 bytes (21 words) - 16:29, 10 February 2017
==How to Mount HFW Cameras==
...encil, please use the mount and trace around the screw holes and make sure to orient the camera correctly.
5 KB (795 words) - 17:27, 30 June 2016
=How to Install SmartPSS for OSX=
This tutorial is showing how to install SmartPSS on Mac computer.
2 KB (227 words) - 18:23, 29 January 2020
==How to Connect a Relay Module==
...ts and specifications before plugging them in without any understanding of how it works, as this can result in possible electrical fires or even the death
3 KB (529 words) - 21:34, 25 July 2016
==How to Setup DHI-ASI1201A-D==
...o the COM and 12V and the Negative wire into GND. Then connect the harness to the lower right connector.
3 KB (559 words) - 23:29, 15 June 2016
...e Purple wire, and RS485- to the Yellow wire. I am also wiring this device to the [[Access_Control/How_To_Setup_DHI_ASI1201A_D|DHI-ASI1201A-D]].
...d now give it a test from the DHI-ASR1101A. A Blue light means it is ready to scan, green means the read was successful, and red means the card was rejec
1 KB (185 words) - 17:14, 28 June 2016
==How to Setup DHI-ASI1212A==
...nal to the NC or NO terminal and then through the COM to the LED then back to ground where the circuit will terminate.
3 KB (494 words) - 17:19, 15 June 2016
==How to Install iDMSS Lite on iPad==
1. Go to the app store and enter in idmss and select the idmss lite HD.
450 bytes (66 words) - 22:33, 10 June 2016
|[[New GUI/Format HDD|How To Format HDD]]
|[[New_GUI/Adding_Additional_Raid_Group|How to Add Additional RAID Group]]
31 KB (4,352 words) - 23:23, 17 November 2022
'''Aperture '''Controls how much light can go through the lens and sensor.
'''Min Illumination''' Minimum illumination is a parameter to show the camera‘s performance in the night or low light scene. The smalle
6 KB (1,030 words) - 17:42, 30 June 2016
==How to set the date and time==
4. Click, "OK" to save your changes.
1 KB (145 words) - 22:39, 29 March 2017
*[[NoVideoSnap | Device Failed to Record Video and Snapshot]]
*[[PlaybackConvert | How to Convert and Playback Backed Up Video]]
9 KB (1,547 words) - 18:20, 5 May 2017
* The device must be connected to the Internet, please check if the connection works properly.
...fault port to open is: 80, 554,37777. To modify default port, please refer to DDNS User’s Manual.
4 KB (602 words) - 22:03, 1 August 2019
This section will show how to setup / use Two Way Talk function with Dahua devices.
3 KB (346 words) - 22:07, 1 April 2021
==How to Setup Email Notifications via Gmail==
* An email address to send the notifications to
4 KB (561 words) - 17:00, 27 May 2022
==How To Setup FTP Snapshot==
'''Please Note''' You must have an FTP currently set up for this to work.
2 KB (281 words) - 18:21, 4 November 2020
...primarily used if your public IP address on the internet changes from time to time (dynamic IP). Setting this feature up will give you another configured
*The device must be connected to the Internet.
3 KB (422 words) - 22:07, 1 August 2019
[[Media:RemoteAccessP2P.pdf|Click Here to Download a PDF Version of this Document]]
This allows you to see devices using P2P on browser.
2 KB (251 words) - 22:08, 1 August 2019
==How to Setup NAS Recording==
102 bytes (14 words) - 22:42, 23 March 2016
servers, M refers to several alternate server, the home server means the server has ownership re
with equipment (selecting server when add device), alternate server refers to the backup machine of
6 KB (1,140 words) - 19:13, 15 August 2016
==How to Set Date and Time==
Change or set the time and date according to the region of where the device recorder is.
2 KB (285 words) - 00:16, 4 November 2020
This article is to show user how to do password reset from local GUI.
2. Monitor that connected to Dahua Recorder
11 KB (1,725 words) - 19:31, 2 August 2019
==Unable to Login from Web Browser==
...r Windows 8 or 8.1 you make sure you IE Browser's security setting are set to low for that IP address.
2 KB (302 words) - 23:10, 12 May 2016
* First Factory default the system to try to clear it
...'t forget that if you were using motion detect for recording you will need to re-enable these features.
2 KB (281 words) - 18:01, 17 August 2016
[[NKB1000_Network_Setup|How to Setup NKB1000 over Network]]
[[NKB1000_RS232_Setup|How to Setup NKB1000 via RS232]]
1 KB (231 words) - 17:23, 17 August 2016
...are experiencing a nonfunctional or non working alarm then you might want to consider that the alarm was setup incorrectly.
* Reset your event options:[[Troubleshoot/NVR/Unable_To_Disarm_Alarm| Unable to Disarm Alarm]]
3 KB (423 words) - 17:58, 17 August 2016
====If your storage drive is filling up quickly and you want to maximize on the time you are recording please consider the following:====
...e, frame rate, bit rate etc. it is recommended to use a storage calculator to determine the appropriate HDD capacity.
6 KB (1,056 words) - 17:56, 17 August 2016
* There is no DivX503Bundle.exe control when you play the file transformed to AVI via media player.
* Download Dahua Smartplayer from dahuasecurity.com to play DAV file.
1 KB (180 words) - 18:58, 13 June 2016