Difference between revisions of "Video Intercom"

(→‎Video Intercom)
 
(248 intermediate revisions by 10 users not shown)
Line 1: Line 1:
−
==Video Intercom==
+
==Dahua Video Intercom==
−
*[[Video_Intercom/
 
−
===PDF Manuals===
 
−
*[https://dahuawiki.com/Manuals/Video_Intercom/ Link to PDF Manuals]
 
−
===VTO: Outdoor Station===
 
−
*[[Video_Intercom/How_To_Add_A_VTO2000A_To_A_VTH1560B|How To Add A VTO2000A To A VTH1560B]]
 
−
*[[Video_Intercom/How_To_Add_A_Second_VTO2000A_To_A_VTH1560B|How To Add A VTO2000A To A VTH1560B]]
 
−
====VTO: Models====
 
−
*VTO1210C-X:
 
−
*VTO2000A: Villa VTO Station
 
−
===VTH: Indoor Monitor===
 
  
−
====VTH: Models====
+
= <div class="center">GEN3 (Latest Generation)</div> [[File:DHI_KTP01_image_web.png|100px|link=]] =
−
*VTH1560B
+
==Description==
−
*VTH1510CH
+
The One-Key Config feature is only available on a few VTHs. Please check the device list below to see what models are compatible
−
===VTN: Network Controller===
+
 
−
===VTN: Models===
+
==Instructions==
−
*VTNS1060A: Provides power to VTH and Villa VTO
+
{| class="wikitable"
−
*VTNC3000A: Provides power for 2-wire devices
+
!colspan="3"|Initializing Video Intercom
−
===Villa Station Models===
+
|-
−
===Villa Station Models===
+
|colspan="3" style="text-align: center;"|
−
===Villa Station vs. Modularize Villa===
+
[[Video_Intercom/SIP_2.0/How_To_Initialize_Video_Intercom_Using_Configtool|How to Initialize Video Intercom using Configtool]]<br />
−
===Power Supply===
+
[[Video_Intercom/VTH_Password_Reset_XML|How to Reset VTH Password Using VDPConfig]]<br />
−
*DC12V1A: VTO and VTH
+
|-
−
*DC24V2.5A: VTNS1060A and VTNC3000A
+
!colspan="2"|DHI-VTO4202F (Modular) Setup !!rowspan="3"| [[file:VTO4202F-P two three module image web.png|100px]]
 +
|-
 +
!Manual Setup
 +
|
 +
[[Video_Intercom/SIP_2.0/How_To_Setup_And_Program_Modules_On_DHI-VTO4202F-P-S2|How to setup and program Modules on DHI-VTO4202F-P-S2]]<br />
 +
[[Video_Intercom/SIP_2.0/How_To_Call_DMSS|How to make calls to DMSS (With Custom License Firmware Only)]]<br />
 +
|-
 +
! '''Configtool Setup'''
 +
|
 +
[[Video_Intercom/SIP_2.0/How_To_Add_VTO4202_To_VTH_Via_Configtool|How to setup DHI-VTO4202F-P-S2 with Indoor Monitor via ConfigTool]]<br />
 +
[[Video_Intercom/SIP_2.0/How_To_Add_More_VTHs_To_Modular_Video_Intercom|How to add additional VTH (Indoor Monitor) for a DHI-VTO4202F-P-S2]]<br />
 +
[[Video_Intercom/SIP_2.0/How_to_setup_DHI-VTO4202F-P-S2_with_Multiple_Floors_via_ConfigTool|How to setup DHI-VTO4202F-P-S2 with Multiple Floors using Configtool]]<br />
 +
|-
 +
!colspan="2"|Stand Alone VTO and VTH !! rowspan="2"|[[file:DHI KTP01 image web.png|100px]]
 +
|-
 +
!One-Key Config
 +
|
 +
[[Video_Intercom/SIP_2.0/Single_VTH_and_VTO_Onekey_Config_Setup|Single VTH and VTO One Key Config Setup]]<br />
 +
[[Video_Intercom/SIP_2.0/Multiple_VTH_and_VTO_One-Key_Config_Setup|Multiple VTH and VTO One Key Config Setup]]<br />
 +
[[Video_Intercom/SIP_2.0/How_To_Add_Secondary_VTO_To_Existing_Intercom_Kit|How to add secondary VTO to existing Intercom Kit]]<br />
 +
|-
 +
!colspan="2" style="text-align: center;"| SmartPSS Lite !!rowspan="2" style="text-align: center;"|[[File:SmartPSSLite.png|100px]]
 +
|-
 +
!SmartPSS Lite Setup
 +
|
 +
[[Video_Intercom/VTO_with_SPSSLite|How to setup a VTO with SmartPSS Lite]]<br />
 +
|-
 +
!colspan="2" style="text-align: center;"| DSS !!rowspan="2" style="text-align: center;"|[[File:DSS Pro V8 Logo.jpg|100px]]
 +
|-
 +
!DSS Pro V8
 +
|
 +
[[Video_Intercom/VTH_and_VTO_Setup_on_DSS_Pro_V8|How to setup VTH and VTO to DSS Pro V8]]<br />
 +
[[Video_Intercom/SIP_2.0/How_To_Forward_Calls_To_DSS_Pro_Client|How to Forward calls to DSS Pro Client]]<br />
 +
|-
 +
! colspan="2"|DMSS !!rowspan="2"|[[file:DMSS_New_Icon.png|100px]]
 +
|-
 +
|colspan="2" style="text-align: center;"|
 +
[[Video_Intercom/SIP_2.0/VTO_Initialization_via_DMSS|How to initialize VTO through DMSS App]]<br />
 +
|-
 +
! colspan="2"| Physical Wiring Setup !!rowspan="2"|[[File:DEE1010B.jpg|100px]]
 +
|-
 +
|colspan="2" style="text-align: center;"|
 +
[[Solution_Delivery/Video_Intercom_Second_Door_Using_DEE1010B|How to setup Second Lock on VTO]]<br />
 +
[[Solution_Delivery/Integrating_Video_Intercom_with_Acccess_Control|Integrating VTO relay to 4-Door Access Controller]]<br />
 +
|-
 +
! colspan="2"| VTH Custom Ring !!rowspan="2"|[[File:VTH2421FWl image web-1.png|90px]]
 +
|-
 +
|colspan="2" style="text-align: center;"|
 +
[[Solution_Delivery/Video_Intercom_VTH_Custom_Audio|How to create custom audio/ring for VTH]]<br />
 +
|}
 +
 
 +
===DSS Express Instructions===
 +
<tabber>
 +
DSS Express V8=
 +
*[[Video_Intercom/VTH_and_VTO_Setup_on_DSS_Express_V8|VTH and VTO Setup on DSS Express V8]]
 +
*[[Video_Intercom/DSS_Express_V8_VTO_Call_To_DSS_Agile_8|How to call to DSS Agile 8]]
 +
*[[Video_Intercom/DSS_Express_V8_VTO_Call_To_DSS_Agile_VDP|How to call to DSS Agile VDP]]
 +
*[[Video_Intercom/VideoAC_Intercom_DSS|How to set up a DHI-ASI8213SA-W to call to virtual rooms in DSS Agile VDP]]
 +
*[[Video_Intercom/How_to_Integrate_Dahua_IPC_to_Video_Intercom_on_DSSExpress_V8|How to bind an IP Camera to VTO Door on DSS Express V8]]
 +
 
 +
 
 +
|-|
 +
DSS Express V7=
 +
*[[Video_Intercom/SIP_2.0/VTH_and_VTO_with_DSS_Express_Setup|VTH and VTO with DSS Express V7 Setup]]
 +
|-|
 +
</tabber>
 +
 
 +
==Software==
 +
{| class="wikitable" style="width: 100%;"
 +
! Application
 +
! Description
 +
! Specifications
 +
! Manual
 +
|-
 +
|style="text-align:center;"|[[File:IPConfigTool_Icon.png|70px|]]
 +
|style="text-align:center;"|[[ConfigTool|'''Configtool''']]<br> ''Locate and manage dahua devices on network''
 +
|colspan="2"|[https://dahuawiki.com/ConfigTool <ul class="fa-ul"> <li><i class="fas fa-file fa-4x" style="color:darkred;></i></li></ul>]
 +
|-
 +
|style="text-align:center;"|[[File:DSS_Express_Icon.png|70px|link=DSS_Express]]
 +
|style="text-align:center;"|[[DSS/V8/DSS_Express|'''DSS Express V8''' <span style="color:red">(NEW)</span>]]<br> ''Pay-as-you-go Security Software for SMB''
 +
|{{Template:DSS_Express_V8_Specification_Template}}
 +
|<!--{{Template:DSS_Express_V8_Manuals_Template}}-->
 +
|-
 +
|style="text-align:center;"|[[File:DSS_Pro_Icon.png|70px|link=DSS_Pro]]
 +
|style="text-align:center;"|[[DSS/V8/DSS_Pro|'''DSS Pro V8''' <span style="color:red">(NEW)</span>]] <br> ''High Available Security Software for Enterprise''
 +
|{{Template:DSS_Pro_V8_Specification_Template}}
 +
|<!--{{Template:DSS_Pro_V8_Manuals_Template}}-->
 +
|-
 +
|style="text-align:center;"|[[File:DSS_Express_Icon.png|70px|link=DSS_Express]]
 +
|style="text-align:center;"|[[DSS_Express|'''DSS Express V7''']]<br> ''Easy-to-Use and Reliable Dahua VMS''
 +
|<!--{{Template:DSS_Express_Std_Specification_Template}}-->
 +
|<!--[https://dahuawiki.com/images/Files/Manuals/DSS%20Express%20User%20Manual_ENG.pdf <ul class="fa-ul"> <li><i class="fas fa-book fa-4x" style="color:darkred;></i></li></ul>]-->
 +
|-
 +
|style="text-align:center;"|[[File:DSS_Pro_Icon.png|70px|link=DSS/DSS_Pro]]
 +
|style="text-align:center;"|[[DSS/DSS_Pro|'''DSS Pro V7''']] <br> ''Comprehensive and Expandable Dahua VMS''
 +
|<!--{{Template:DSS_Pro_Specification_Template}}-->
 +
|<!--[https://dahuawiki.com/images/Files/Manuals/DSS_Pro_Client_User_Manual_ENG.pdf <ul class="fa-ul"> <li><i class="fas fa-book fa-4x" style="color:darkred;></i></li></ul>]-->
 +
|-
 +
|}
 +
 
 +
==GEN3 Devices==
 +
<tabber>
 +
Outdoor Station=
 +
{{Template:Product_Video_Intercom_Outdoor_GEN3}}
 +
|-|
 +
Indoor Monitor=
 +
{{Template:Product_Video_Intercom_Indoor_GEN3}}
 +
|-|
 +
Accessories=
 +
{{Template:Product_Video_Intercom_Accessories_GEN3}}
 +
|-|
 +
Kits=
 +
{{Template:Product_Kits_VDP}}
 +
</tabber>
 +
 
 +
= <div class="center">SIP 2.0 (GEN 2 with "-S")</div>[[File:VTO2111D-WP.png|100px|link=]] =
 +
==Password Info==
 +
New Generation of video intercom does not have default password. User must create a password during the device initialization.
 +
 
 +
The first and second generation video intercom has these below default password:
 +
*002236
 +
*888888
 +
*123456
 +
*User password initially is 123456.
 +
*Unlock password initially is null.
 +
*Arm password initially is 123456.
 +
*Disarm password initially is 123456.
 +
*Anti-hijack password initially is 654321.
 +
 
 +
'''NOTE: You cannot mix and match Video Intercom devices from Generation 1 and 2, or Technology.'''
 +
 
 +
'''NOTE2: Generation 1 devices cannot be upgraded to Generation 2 firmware. Generation 2 devices cannot be downgraded to support Generation 1 devices.'''
 +
 
 +
'''NOTE3: Generation 2 and Generation 3 will work together as they both use SIP technology.'''
 +
 
 +
==Instructions==
 +
=== VDP Config Instructions===
 +
 
 +
* [[Software/Dahua Toolbox/VDPConfig/Discover Device|How To Discover A Device In VDPConfig]]
 +
* [[Software/Dahua Toolbox/VDPConfig/Modify Network Settings|How To Modify Network Settings In VDPConfig]]
 +
* [[Software/Dahua Toolbox/VDPConfig/Modify System Settings|How To Modify System Settings In VDPConfig]]
 +
* [[Software/Dahua Toolbox/VDPConfig/Upgrade Firmware|How To Upgrade Firmware In VDPConfig]]
 +
* [[Software/Dahua Toolbox/VDPConfig/Adjust_Time|How To Adjust the time of a device in VDPConfig]]
 +
 
 +
===Stand Alone VTO===
 +
*[[Video_Intercom/SIP_2.0/Stand_Alone_VTO2111D-WP_SIP_2.0_Setup|Stand Alone VTO2111D-WP SIP 2.0 Setup]]
 +
 
 +
===VTH and VTO Setup===
 +
*[[Video_Intercom/SIP_2.0/Stand_Alone_VTH_and_VTO_Setup|Single VTH and VTO Setup]]
 +
*[[Video_Intercom/SIP_2.0/Stand_Alone_Multiple_VTH_and_VTO_Setup|Multiple VTH and VTO Setup]]
 +
 
 +
===DSS Express Setup===
 +
*[[Video_Intercom/Standalone_VTO_and_DSS_Express_Setup|Standalone VTO and DSS Express Setup]]
 +
*[[Video_Intercom/SIP_2.0/VTH_and_VTO_with_DSS_Express_Setup|VTH and VTO with DSS Express Setup]]
 +
 
 +
==Software and Mobile App==
 +
{| class="wikitable" style="width: 100%;
 +
|-
 +
! style="text-align:center;"|Application
 +
! style="text-align:center;"|Icon
 +
! style="text-align:center;"|Description
 +
! style="text-align:center;" colspan="2"|Downloads
 +
|-
 +
! style="text-align:center;" |ConfigTool
 +
! style="text-align:center;"|[[File:IPConfigTool_Icon.png|50px|Config Tool 5.0|link=https://dahuawiki.com/images/Files/Software/ConfigTool/General_ConfigTool_ChnEng_V5.000.0000001.7.R.20210227.zip]]
 +
|Locate dahua devices on network and configure new generation of Video Intercom
 +
|[https://dahuawiki.com/images/Files/Software/ConfigTool/General_ConfigTool_ChnEng_V5.000.0000001.7.R.20210227.zip <ul class="fa-ul">  <li><i class="fab fa-windows fa-2x" style="color:darkred;></i></li></ul>]
 +
|[https://dahuawiki.com/images/Files/Software/OSX/General_ConfigTool-MAC_Eng_V2.001.0000001.3.R.200630.tar.gz <ul class="fa-ul">  <li><i class="fab fa-apple fa-2x" style="color:darkred;></i></li></ul>]
 +
|-
 +
! style="text-align:center;"|DSS Pro
 +
! style="text-align:center;"|[[File:DSS_Pro_Icon.png|50px|link=https://dahuawiki.com/images/Files/Software/DSS/General_OverseasDSS-PRO_Win64_IS_V7.002.15H3000.0.R.20201030.exe]]
 +
|VMS Software
 +
|[{{Template:DSS_Icon_Main_Page}} <ul class="fa-ul">  <li><i class="fab fa-windows fa-2x" style="color:darkred;></i></li></ul>]
 +
|-
 +
! style="text-align:center;"|DMSS
 +
! style="text-align:center;"|[[File:DMSS_New_Icon.png|50px|link=https://dahuawiki.com/DMSS]]
 +
|Mobile Application
 +
|[https://play.google.com/store/apps/details?id=com.mm.android.DMSS&hl=en_US <ul class="fa-ul">  <li><i class="fab fa-android fa-2x" style="color:darkred;></i></li></ul>]
 +
|[https://apps.apple.com/us/app/dmss/id1493268178 <ul class="fa-ul">  <li><i class="fab fa-apple fa-2x" style="color:darkred;></i></li></ul>]
 +
|-
 +
! style="text-align:center; text:bold" |DSS Agile VDP
 +
! style="text-align:center;|[[File:DSS_Agile_VDP_Icon.png|55px]]
 +
| Mobile monitoring software that is designed for Video Intercom Device in DSS Platform.
 +
| style="text-align:center;" |[https://play.google.com/store/apps/details?id=com.mm.dss.agile.cn&hl=en_US&gl=US <ul class="fa-ul"><li><i class="fab fa-android fa-2x" style="color:darkred;></i></li></ul>]
 +
||[https://apps.apple.com/gm/app/dss-agile/id1494992846 <ul class="fa-ul">  <li><i class="fab fa-apple fa-2x" style="color:darkred;></i></li></ul>]
 +
|-
 +
|}
 +
 
 +
==SIP 2.0 Devices==
 +
'''WARNING! Do Not Flash This Firmware Unless You Are 100% Sure All of Your Video Intercom Devices are compatible with SIP 2.0 before updating your devices'''
 +
 
 +
<tabber>
 +
Outdoor Station=
 +
{{Template:Product_Video_Intercom_Outdoor_SIP}}
 +
|-|
 +
Indoor Monitor=
 +
{{Template:Product_Video_Intercom_Indoor_SIP}}
 +
|-|
 +
Accessories=
 +
{| class="wikitable"
 +
|+Accessories
 +
|-
 +
|[[Video_Intercom/Products/VTNS1060A|VTNS1060A]]
 +
|[[File:VTNS1060A.png|150px|link=Video_Intercom/Products/VTNS1060A]]
 +
|Network Power Supply for IP System
 +
|
 +
*Decent appearance
 +
*Dahua protocol network power supply switch
 +
*Connect max 6 indoor monitors with the Cat 5e cable, transfer the signal and power together
 +
|{{Template:DHI-VTNS1060A_Specification_Template}}
 +
|-
 +
|[[Video_Intercom/Products/VTNC3000A|VTNC3000A]]
 +
|[[file:VTNC3000A.png|150px|link=Video_Intercom/Products/VTNC3000A]]
 +
|2-Wire Network Controller
 +
|
 +
*4 groups of 2-wire port, provide power and signal to other 2-wire devices
 +
*RJ45 port, connected LAN
 +
*Surface mounted & DIN-Rail Mounted
 +
|<!--{{Template:Place_Holder_Specification_Template}}-->
 +
|-
 +
|[[Accessories/Power_Supply/DH_PFM321D_US|PFM321D-US]]
 +
|[[File:DH-PFM321D-US.jpg|150px|link=Accessories/Power_Supply/DH_PFM321D_US]]
 +
|Power Supply
 +
|
 +
*100VAC~240VAC-12V1A-VI-DH-PFM321D-US-US Standard-Φ5.5×Φ2.1×12
 +
|{{Template:DH_PFM321D_US_Specification_Template}}
 +
|-
 +
|[[Accessories/Power_Supply/DH_PFM320D_US|PFM320D-US]]
 +
|[[File:DH-PFM321D-US.jpg|150px|link=Accessories/Power_Supply/DH_PFM320D_US]]
 +
|Power Supply
 +
|
 +
*100VAC~240VAC-12V2A-VI-DH-PFM321D-US-US Standard-Φ5.5×Φ2.1×12
 +
|{{Template:DH_PFM320D_US_Specification_Template}}
 +
|-
 +
</tabber>
 +
 
 +
= <div class="center">GEN 1</div> [[File:VTO2000A.png|100px|link=]] =
 +
 
 +
'''NOTE: You cannot mix and match Video Intercom devices from Generation 1 and 2, or Technology.'''
 +
 
 +
'''NOTE2: Generation 1 devices cannot be upgraded to Generation 2 firmware. Generation 2 devices cannot be downgraded to support Generation 1 devices.'''
 +
 
 +
==Instructions==
 +
===Stand Alone VTO===
 +
*[[Video_Intercom/How_To_Configure_A_VTO2111D_WP_With_WiFi|How To Configure A VTO2111D-WP With WiFi]]
 +
===VTH and VTO Setup===
 +
*[[Video_Intercom/How_To_Add_A_VTH1550CH_To_A_VTO1210C-X|How To Add A VTH1550CH To a VTO1210C-X]]
 +
*[[Video_Intercom/How_To_Add_A_Second_VTH1550CH_To_A_VTO1210C-X|How To Add A Second VTH1550CH To A VTO1210C-X]]
 +
*[[Video_Intercom/How_To_Add_A_VTH1660CH_To_A_VTO1210C-X|How To Add A Second VTH1660CH To a VTO1210C-X]]
 +
*[[Video_Intercom/How_To_Add_A_VTO2111D-WP_To_A_VTH5221D|How To Add A VTO2111D-WP To a VTH5221D]]
 +
*[[Video_Intercom/How_To_Add_A_Second_VTH1550CH_To_A_VTO1210C-X|How To Add A Second VTH1550CH To a VTO2111D-WP]]
 +
===DSS Express Setup===
 +
*[[Video_Intercom/How_To_Add_A_VTO2111D_WP_To_DSS_S2|How To Add A VTO2111D-WP to DSS-S2]]
 +
 
 +
 
 +
==GEN1 Devices==
 +
'''WARNING! Do Not Flash This Firmware Unless You Are 100% Sure All of Your Video Intercom Devices are Gen 1 before updating your devices'''
 +
 
 +
<tabber>
 +
Outdoor Station=
 +
{{Template:Product_Video_Intercom_Outdoor}}
 +
|-|
 +
Indoor Monitor=
 +
{{Template:Product_Video_Intercom_Indoor}}
 +
|-|
 +
Accessories=
 +
{| class="wikitable"
 +
|+Accessories
 +
|-
 +
|[[Video_Intercom/Products/VTNS1060A|VTNS1060A]]
 +
|[[File:VTNS1060A.png|150px|link=Video_Intercom/Products/VTNS1060A]]
 +
|Network Power Supply for IP System
 +
|
 +
*Decent appearance
 +
*Dahua protocol network power supply switch
 +
*Connect max 6 indoor monitors with the Cat 5e cable, transfer the signal and power together
 +
|-
 +
|[[Video_Intercom/Products/VTNC3000A|VTNC3000A]]
 +
|[[file:VTNC3000A.png|150px|link=Video_Intercom/Products/VTNC3000A]]
 +
|2-Wire Network Controller
 +
|
 +
*4 groups of 2-wire port, provide power and signal to other 2-wire devices
 +
*RJ45 port, connected LAN
 +
*Surface mounted & DIN-Rail Mounted
 +
|-
 +
|[[Accessories/Power_Supply/DH_PFM321D_US|PFM321D-US]]
 +
|[[File:DH-PFM321D-US.jpg|150px|link=Accessories/Power_Supply/DH_PFM321D_US]]
 +
|Power Supply
 +
|
 +
*100VAC~240VAC-12V1A-VI-DH-PFM321D-US-US Standard-Φ5.5×Φ2.1×12
 +
|-
 +
|[[Accessories/Power_Supply/DH_PFM320D_US|PFM320D-US]]
 +
|[[File:DH-PFM321D-US.jpg|150px|link=Accessories/Power_Supply/DH_PFM320D_US]]
 +
|Power Supply
 +
|
 +
*100VAC~240VAC-12V2A-VI-DH-PFM321D-US-US Standard-Φ5.5×Φ2.1×12
 +
|-
 +
|[[Video_Intercom/Products/VTOB108|VTOB108]]
 +
|[[File:VTOB108.png|150px|link=Video_Intercom/Products/VTOB108]]
 +
|Surface Mounted Box for VTO2000A
 +
|
 +
*Material: Metal
 +
*Size: 145mm*134mm*88mm
 +
*Weight: 1 Kg
 +
*Surface mounted box
 +
|-
 +
|[[Video_Intercom/Products/VTOB107|VTOB107]]
 +
|[[File:VTOB107.png|150px|linkVideo_Intercom/Products/VTOB107]]
 +
|Flush Mounted Box for VTO2000A
 +
|
 +
*Material: Metal
 +
*Size: 125mm*135mm*56mm
 +
*Weight: 0.8 Kg
 +
*Flush mounted box
 +
|-
 +
|[[Video_Intercom/Products/VTOB110|VTOB110]]
 +
|[[File:VTOB110.png|150px|link=Video_Intercom/Products/VTOB110]]
 +
|Surface Mounted Box for VTO1210C-X
 +
|
 +
*Material: Metal
 +
*Size: 145mm*134mm*70mm
 +
*Weight: 1 Kg
 +
*Surface mounted box
 +
|-
 +
|[[Video_Intercom/Products/VTOB103|VTOB103]]
 +
|[[File:VTOB103.png|150px|link=Video_Intercom/Products/VTOB103]]
 +
|Flush Mounted Box for VTO1210C-X
 +
|
 +
*Material: Plastic
 +
*Size: 126mm*389mm*71mm
 +
*Weight: 0.5 Kg
 +
*Flush mounted box
 +
|}
 +
</tabber>
 +
 
 +
<headertabs/>
 +
 
 +
 
 +
==FAQ==
 +
 
 +
'''Q:''' Which model of VTO (Outdoor Station) can work stand-alone and make a call notification to DMSS when call button is pressed?
 +
 
 +
'''A:''' [[Video_Intercom/Products/DHI-VTO2202F-P|DHI-VTO2202F-P]], [[Video Intercom/Products/DHI-VTO2311R-WP|DHI-VTO2311R-WP]], [[Video Intercom/Products/DHI-VTO2211G-WP|DHI-VTO2211G-WP]], [[Video_Intercom/Products/VTO2000A-S|VTO2000A-S]], [[Video_Intercom/Products/VTO2000A_2|VTO-2000A-2-S]], [[Video_Intercom/Products/DHI_VTO2111D_WP-S|VTO2111D-WP-S]], [[Video_Intercom/Products/VTO2000A|VTO2000A]], [[Video_Intercom/Products/VTO2000A_2|VTO2000A-2]]
 +
 
 +
 
 +
'''Q:''' Can Apartment outdoor station ([[Video_Intercom/Products/VTO1210C_X|VTO1210C-X]] and [[Video_Intercom/Products/VTO1210C_X-S|VTO1210C-X-S]] and [[Video_Intercom/Products/DHI-VTO4202F|DHI-VTO4202F]]) work with DMSS App?
 +
 
 +
'''A:''' Yes, but it requires License for firmware customization. Please reach out to your local Sales Rep or Technical Consultant.
 +
 
 +
 
 +
'''Q:''' How do I access device config page in VTH (indoor monitor) device?
 +
 
 +
'''A:''' From the homepage, press and hold Settings button for 6 seconds.
 +
 
 +
 
 +
'''Q:''' What the difference between Transmission 1 and Transmission 2 on the network settings?
 +
 
 +
'''A:''' '''Mode 1:''' Multicast (multicast).
 +
The default is mode 1. Using multicast in a multicast network environment, the effect is best at this time<br>
 +
'''Mode 2:''' Unicast (TCP),
 +
If the router does not support multicast, the group call will have a black screen on VTH, then you can switch to unicast mode. In addition, if the network is particularly poor, you can also use this mode, because TCP has a retransmission mechanism to avoid frame loss.
 +
 
 +
==SIP 2.0 Performance Chart==
 +
{{Template:SIP2.0_Performance_Chart}}
 +
 
 +
{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
 +
 
 +
[[Category:Model Specific Pages]]
 +
 
 +
 
 +
 
 +
 
 +
[[Category:VTO]]
 +
[[Category:VTH]]
 +
[[Category:USA Products]]
 +
[[Category:Spec Page]]
 +
[[Category:How To]]

Latest revision as of 14:05, 15 April 2024

Dahua Video Intercom

Description

The One-Key Config feature is only available on a few VTHs. Please check the device list below to see what models are compatible

Instructions

Initializing Video Intercom

How to Initialize Video Intercom using Configtool
How to Reset VTH Password Using VDPConfig

DHI-VTO4202F (Modular) Setup VTO4202F-P two three module image web.png
Manual Setup

How to setup and program Modules on DHI-VTO4202F-P-S2
How to make calls to DMSS (With Custom License Firmware Only)

Configtool Setup

How to setup DHI-VTO4202F-P-S2 with Indoor Monitor via ConfigTool
How to add additional VTH (Indoor Monitor) for a DHI-VTO4202F-P-S2
How to setup DHI-VTO4202F-P-S2 with Multiple Floors using Configtool

Stand Alone VTO and VTH DHI KTP01 image web.png
One-Key Config

Single VTH and VTO One Key Config Setup
Multiple VTH and VTO One Key Config Setup
How to add secondary VTO to existing Intercom Kit

SmartPSS Lite SmartPSSLite.png
SmartPSS Lite Setup

How to setup a VTO with SmartPSS Lite

DSS DSS Pro V8 Logo.jpg
DSS Pro V8

How to setup VTH and VTO to DSS Pro V8
How to Forward calls to DSS Pro Client

DMSS DMSS New Icon.png

How to initialize VTO through DMSS App

Physical Wiring Setup DEE1010B.jpg

How to setup Second Lock on VTO
Integrating VTO relay to 4-Door Access Controller

VTH Custom Ring VTH2421FWl image web-1.png

How to create custom audio/ring for VTH

DSS Express Instructions

Software

Application Description Specifications Manual
IPConfigTool Icon.png Configtool
Locate and manage dahua devices on network
DSS Express Icon.png DSS Express V8 (NEW)
Pay-as-you-go Security Software for SMB
DSS Pro Icon.png DSS Pro V8 (NEW)
High Available Security Software for Enterprise
DSS Express Icon.png DSS Express V7
Easy-to-Use and Reliable Dahua VMS
DSS Pro Icon.png DSS Pro V7
Comprehensive and Expandable Dahua VMS

GEN3 Devices

Models Image Station Type Generation Specification Manual Main Firmware
DHI-VTO4202F VTO4202F-P two three module image web.png 2-Wire IP Intercom Modular Apartment Outdoor Station SIP

Build Date: 08-13-2022
DHI-VTO2311R-WP DHI-VTO2311R-WP.png WiFi Villa Outdoor Station SIP

Build Date: 08-25-2023
DHI-VTO2202F-P-S2 VTO2202F.png 2-Wire IP Villa Outdoor Station SIP

Build Date: 08-13-2022
DHI-VTO2202F-P VTO2202F.png IP Villa Outdoor Station SIP

Build Date: 05-23-2022
DHI-VTO2211G-WP DHI-VTO2211G-WP View Front-logo web.png Wi-Fi Villa Outdoor Station SIP

Build Date: 05-23-2022

Models Image Station Type Description Specification Manual Firmware
DHI-VTH5421HB-W DHI-VTH5421HB-W.png IP Color Indoor Monitor
  • 7-inch Capacitive Touch Screen, 1024 x 600 Resolution
  • Setup and Activate up to Six (6) Alarm Inputs and One (1) Alarm Output
  • WiFi Connection
  • H.265 and H.264 Video Decoding
  • Supports Standard PoE
  • Contact Management Center with a Single Tap
  • Integrated Micro SD Card Slot, maximum 64 GB
  • Surface-mounted

Build Date: 08-04-2023
DHI-VTH5422HW DHI-VTH5422HW View Front-logo image web.png 2-wire IP Color Indoor Monitor
  • 7-inch Capacitive Touch Screen, 1024 x 600 Resolution
  • Supports H.265 and H.264 Video Encoding
  • Setup and Activate up to Six Alarm Inputs and One Alarm Output
  • Two-wire Digital Communication and Power (via Switch)
  • Compatible with Two-wire or RJ45 Interfaces
  • Supports Standard PoE
  • Contact Management Center with a Single Tap
  • Integrated Micro SD Card Slot, maximum 64 GB
  • Surface-mounted

Build Date: 08-04-2023
DHI-VTH2421FW-P VTH2421FWl image web-1.png IP Color Indoor Monitor
  • 7-inch TFT Screen
  • 1024 x 600 Resolution
  • Simplified Connection and Setup to Compatible Outdoor Stations
  • Integrated Micro SD Card Slot, maximum 32 GB
  • Perform Call Session Recordings and Take Snapshots of Live Video(requires SD card)
  • Setup and Activate up to Six (6) Alarm Inputs
  • One Key Config

Models Image Type Description Specification Manual
DHI-VTNS2003B-2 DHI-VTNS2003B-2 image web.png Two-wire Power Supply Switch
  • 10-level Cascade via Two-wire Port
  • Connect up to 20 Indoor Monitors and Two (2) Door Stations
  • Supports Connection via an RJ45 Port
DEE1010B DEE1010B.jpg Video Intercom Extension Module
  • Lock NO Output
  • Lock NC Output
  • Door Open Button
  • Door Status Detection

Dahua Housing Dahua Model Outdoor Station Indoor Station Short Description Specifications VTO Firmware VTH Firmware
Kits/DHI-KTP01(S) DHI-KTP01(S) DHI-VTO2202F-P DHI-VTH2421FW-P

DHI-VTO2202F-P - IP Outdoor Station
DHI-VTH2421FW-P - Indoor Monitor
DH-PFS3005-4ET-60 - PoE Switch
VTM115 - Surface-mount Box for DHI-VTO2202F-P
One-Key Config


Build Date: 05-23-2022

Build Date: 08-04-2023

Password Info

New Generation of video intercom does not have default password. User must create a password during the device initialization.

The first and second generation video intercom has these below default password:

  • 002236
  • 888888
  • 123456
  • User password initially is 123456.
  • Unlock password initially is null.
  • Arm password initially is 123456.
  • Disarm password initially is 123456.
  • Anti-hijack password initially is 654321.

NOTE: You cannot mix and match Video Intercom devices from Generation 1 and 2, or Technology.

NOTE2: Generation 1 devices cannot be upgraded to Generation 2 firmware. Generation 2 devices cannot be downgraded to support Generation 1 devices.

NOTE3: Generation 2 and Generation 3 will work together as they both use SIP technology.

Instructions

VDP Config Instructions

Stand Alone VTO

VTH and VTO Setup

DSS Express Setup

Software and Mobile App

Application Icon Description Downloads
ConfigTool Config Tool 5.0 Locate dahua devices on network and configure new generation of Video Intercom
DSS Pro DSS Pro Icon.png VMS Software
DMSS DMSS New Icon.png Mobile Application
DSS Agile VDP DSS Agile VDP Icon.png Mobile monitoring software that is designed for Video Intercom Device in DSS Platform.

SIP 2.0 Devices

WARNING! Do Not Flash This Firmware Unless You Are 100% Sure All of Your Video Intercom Devices are compatible with SIP 2.0 before updating your devices

Models Image Station Type Generation Description Specification Manual Main Firmware MCU Firmware Voice Firmware
VTO1210C-X-S VTO1210C-X.png Apartment Outdoor Station SIP
  • HD CMOS camera
  • Stainless steel panel, IP54, IK07
  • Night vision & Voice indication
  • Local card opening
  • Video & Audio messaging
  • Surface & Flush mounted

Build Date: 07-08-2019

Build Date: 03-05-2019

Build Date: 04-20-2019
VTO2000A-S VTO2000A.png Villa Outdoor Station SIP
  • HD CMOS camera
  • Stainless steel panel, IP54, IK07
  • Night vision & Voice indication
  • Video & Audio messaging
  • Remote intercom with mobile APP
  • Surface mounted & Flush mounted

Build Date: 07-08-2019

Build Date: 11-23-2018

Build Date: 04-20-2019
VTO2000A-2-S VTO2000A.png 2wire Villa Outdoor Station SIP
  • HD CMOS camera
  • Stainless steel panel, IP54, IK07
  • Night vision & Voice indication
  • Video & Audio messaging
  • Remote intercom with mobile APP (VTNC3000A needed)
  • Surface mounted & Flush mounted

Build Date: 07-08-2019

Build Date: 11-23-2018

Build Date: 04-23-2019
VTO2111D-WP-S VTO2111D-WP.png Wireless Outdoor Station SIP
  • HD CMOS camera
  • Large field of view angle
  • Night vision
  • Voice indication
  • Remote intercom with mobile APP
  • Surface mounted

Build Date: 07-08-2019

Build Date: 04-23-2019

Build Date: 02-25-2019

Models Image Station Type Description Specification Manual Firmware Firmware (Part 2)
VTH1550CH-S DHI-VTH1550CH.png IP Color Indoor Monitor
  • HD CMOS camera
  • Stainless steel panel, IP54, IK07
  • Night vision & Voice indication
  • Local card openning
  • Video & Audio messaging
  • Surface & Flush mounted

Build Date: 05-09-2023
VTH1550CHW-2-S DHI-VTH1550CH.png 2wire IP Indoor Monitor 7 inch
  • 7" TFT Capacitive touch screen
  • IPC surveillance (VTNC3000A needed)
  • Alarm integration
  • Micro SD card optional, max 32GB
  • Record & Snapshot (SD card needed)

Build Date: 03-21-2019
VTH5221D-S DHI-VTH5221D.png Wireless indoor monitor 7-inch- Black
  • 7-inch capacitive touch screen, resolution 1024×600
  • IPC surveillance
  • Alarm integration
  • Group call
  • 2-Door control
  • Micro SD slot, max 32GB
  • Record and snapshot (SD card needed)
  • Wi-Fi & POE
  • Surface mounted

Build Date: 08-04-2023

Build Date: 08-04-2023
DHI-VTH5221DW-S DHI-VTH5221DW.png Wireless indoor monitor 7-inch- Black
  • 7-inch Capacitive Touch Screen, 1024 x 600 Resolution
  • IPC Surveillance
  • Alarm Integration and Group Call
  • Two-door Control
  • Micro SD Card Slot, maximum 32 GB
  • Add Devices in SmartPSS via P2P Connection
  • Record and Snapshot Functions (requires SD card)
  • WiFi-enabled and PoE Power Supply
  • Surface-mounted

Build Date: 08-04-2023

Build Date: 08-04-2023

Accessories
VTNS1060A VTNS1060A.png Network Power Supply for IP System
  • Decent appearance
  • Dahua protocol network power supply switch
  • Connect max 6 indoor monitors with the Cat 5e cable, transfer the signal and power together
VTNC3000A VTNC3000A.png 2-Wire Network Controller
  • 4 groups of 2-wire port, provide power and signal to other 2-wire devices
  • RJ45 port, connected LAN
  • Surface mounted & DIN-Rail Mounted
PFM321D-US DH-PFM321D-US.jpg Power Supply
  • 100VAC~240VAC-12V1A-VI-DH-PFM321D-US-US Standard-Φ5.5×Φ2.1×12
PFM320D-US DH-PFM321D-US.jpg Power Supply
  • 100VAC~240VAC-12V2A-VI-DH-PFM321D-US-US Standard-Φ5.5×Φ2.1×12

NOTE: You cannot mix and match Video Intercom devices from Generation 1 and 2, or Technology.

NOTE2: Generation 1 devices cannot be upgraded to Generation 2 firmware. Generation 2 devices cannot be downgraded to support Generation 1 devices.

Instructions

Stand Alone VTO

VTH and VTO Setup

DSS Express Setup


GEN1 Devices

WARNING! Do Not Flash This Firmware Unless You Are 100% Sure All of Your Video Intercom Devices are Gen 1 before updating your devices

Models Image Station Type Description Manual Firmware
VTO1210C-X VTO1210C-X.png Apartment Outdoor Station
  • HD CMOS camera
  • Stainless steel panel, IP54, IK07
  • Night vision & Voice indication
  • Local card opening
  • Video & Audio messaging
  • Surface & Flush mounted

Build Date: 06-14-2018
VTO1210B-X VTO1210B-X.png Apartment Outdoor Station
  • HD CMOS camera
  • Tempered glass panel, IP65
  • Night vision & Voice indication
  • Local card opening
  • Video & Audio messaging
  • Flush mounted

Build Date: 06-14-2018
VTO1220BW VTO1220BW.png Apartment Outdoor Station
  • HD CMOS camera
  • Tempered glass panel, IP65
  • Night vision & Voice indication
  • Local card openning
  • Video & Audio messaging
  • Flush mounted

Build Date: 06-14-2018
VTO2000A VTO2000A.png Villa Outdoor Station
  • HD CMOS camera
  • Stainless steel panel, IP54, IK07
  • Night vision & Voice indication
  • Video & Audio messaging
  • Remote intercom with mobile APP
  • Surface mounted & Flush mounted

Build Date: 06-13-2018
VTO2000A-2 VTO2000A.png 2wire Villa Outdoor Station
  • HD CMOS camera
  • Stainless steel panel, IP54, IK07
  • Night vision & Voice indication
  • Video & Audio messaging
  • Remote intercom with mobile APP (VTNC3000A needed)
  • Surface mounted & Flush mounted

Build Date: 06-13-2018
VTO2111D-WP VTO2111D-WP.png Wireless Outdoor Station
  • HD CMOS camera
  • Large field of view angle
  • Night vision
  • Voice indication
  • Remote intercom with mobile APP
  • Surface mounted

Build Date: 07-31-2018

Models Image Station Type Description Manual Firmware
VTH1550CH DHI-VTH1550CH.png Apartment Outdoor Station
  • HD CMOS camera
  • Stainless steel panel, IP54, IK07
  • Night vision & Voice indication
  • Local card openning
  • Video & Audio messaging
  • Surface & Flush mounted

Build Date: 06-22-2018
VTH1660CH VTH1660CH.jpg IP Indoor Monitor 10 inch
  • Displayer: Color 10.2-inch TFT LCD,
  • Capacitive touch screen, metal frame
  • Support 8 wire alarm input extension or home appliance
  • Call among households
  • 1 channel 10/100Mbps self-adaptive Ethernet
  • Support outdoor station and IPC monitor
  • Support leave audio and video message
  • Support supplied power by network cable
  • SD card inside
  • Flush mounted

Build Date: 06-22-2018
VTH1550CHW-2 DHI-VTH1550CH.png 2wire IP Indoor Monitor 7 inch
  • 7" TFT Capacitive touch screen
  • IPC surveillance (VTNC3000A needed)
  • Alarm integration
  • Micro SD card optional, max 32GB
  • Record & Snapshot (SD card needed)

Build Date: 06-22-2018
VTH5221D DHI-VTH5221D.png Wireless indoor monitor 7-inch- Black
  • 7-inch capacitive touch screen, resolution 1024×600
  • IPC surveillance
  • Alarm integration
  • Group call
  • 2-Door control
  • Micro SD slot, max 32GB
  • Record and snapshot (SD card needed)
  • Wi-Fi & POE
  • Surface mounted

Build Date: 07-31-2018
DHI-VTH5221DW DHI-VTH5221DW.png Wireless indoor monitor 7-inch- Black
  • 7-inch Capacitive Touch Screen, 1024 x 600 Resolution
  • IPC Surveillance
  • Alarm Integration and Group Call
  • Two-door Control
  • Micro SD Card Slot, maximum 32 GB
  • Add Devices in SmartPSS via P2P Connection
  • Record and Snapshot Functions (requires SD card)
  • WiFi-enabled and PoE Power Supply
  • Surface-mounted

Build Date: 07-31-2018

Accessories
VTNS1060A VTNS1060A.png Network Power Supply for IP System
  • Decent appearance
  • Dahua protocol network power supply switch
  • Connect max 6 indoor monitors with the Cat 5e cable, transfer the signal and power together
VTNC3000A VTNC3000A.png 2-Wire Network Controller
  • 4 groups of 2-wire port, provide power and signal to other 2-wire devices
  • RJ45 port, connected LAN
  • Surface mounted & DIN-Rail Mounted
PFM321D-US DH-PFM321D-US.jpg Power Supply
  • 100VAC~240VAC-12V1A-VI-DH-PFM321D-US-US Standard-Φ5.5×Φ2.1×12
PFM320D-US DH-PFM321D-US.jpg Power Supply
  • 100VAC~240VAC-12V2A-VI-DH-PFM321D-US-US Standard-Φ5.5×Φ2.1×12
VTOB108 VTOB108.png Surface Mounted Box for VTO2000A
  • Material: Metal
  • Size: 145mm*134mm*88mm
  • Weight: 1 Kg
  • Surface mounted box
VTOB107 linkVideo_Intercom/Products/VTOB107 Flush Mounted Box for VTO2000A
  • Material: Metal
  • Size: 125mm*135mm*56mm
  • Weight: 0.8 Kg
  • Flush mounted box
VTOB110 VTOB110.png Surface Mounted Box for VTO1210C-X
  • Material: Metal
  • Size: 145mm*134mm*70mm
  • Weight: 1 Kg
  • Surface mounted box
VTOB103 VTOB103.png Flush Mounted Box for VTO1210C-X
  • Material: Plastic
  • Size: 126mm*389mm*71mm
  • Weight: 0.5 Kg
  • Flush mounted box


FAQ

Q: Which model of VTO (Outdoor Station) can work stand-alone and make a call notification to DMSS when call button is pressed?

A: DHI-VTO2202F-P, DHI-VTO2311R-WP, DHI-VTO2211G-WP, VTO2000A-S, VTO-2000A-2-S, VTO2111D-WP-S, VTO2000A, VTO2000A-2


Q: Can Apartment outdoor station (VTO1210C-X and VTO1210C-X-S and DHI-VTO4202F) work with DMSS App?

A: Yes, but it requires License for firmware customization. Please reach out to your local Sales Rep or Technical Consultant.


Q: How do I access device config page in VTH (indoor monitor) device?

A: From the homepage, press and hold Settings button for 6 seconds.


Q: What the difference between Transmission 1 and Transmission 2 on the network settings?

A: Mode 1: Multicast (multicast). The default is mode 1. Using multicast in a multicast network environment, the effect is best at this time
Mode 2: Unicast (TCP), If the router does not support multicast, the group call will have a black screen on VTH, then you can switch to unicast mode. In addition, if the network is particularly poor, you can also use this mode, because TCP has a retransmission mechanism to avoid frame loss.

SIP 2.0 Performance Chart

SIP2.0 Performance Chart
System Capacity\SIP Server Community Apartment Small
apartment 		Villa/Office
V8 V7
DSS7016-S2 DSS4004-S2 DSS Pro DSS Express DSS7016-S2 DSS4004-S2 DSS Pro DSS Express Apartment Door Station Modular Door
Station 		Villa Door
Station 		Wi-Fi Villa
Station 		1st 2-Wire Villa
Station 		2nd 2-Wire Villa
Station 		New 2-Wire Villa
Station
VTO Count 2000
(5000
w/ Custom Firmware) 		1000 2000 256 200(Including
VTS) 		64(Including VTS) 64(Including VTS) 32(Including VTS) 200/300VTH+20VTO 20 4 (1)Use VTNC3000A Networking,VTO+VTH≤4

(2)No VTNC3000A Networking,VTO+VTH≤5

20 Use VTNS2003B-2 Networking,VTO+VTH≤6
VTH Count 2000 (5000 Distributed) 1000 1000 256 10 3 10
VTH Master/Slave Capacity 1Master，4Slave 1Master,9Slave 1Master,1Slave (1)1Master2Slave，Use VTNC3000A Networking 1Master,9Slave 1Master,4Slave
(2).1 Master and 3 Slave，No VTNC3000A Networking
Video Surveillance Count 4 3-As SIP Server Door Station 3 3 3 3
4 (VTH monitor VTO Simultaneously) 4-Non-SIP Server Door Station(VTH monitor VTO Simultaneously) 3 (VTH monitor VTO Simultaneously) 3 (VTH monitor VTO Simultaneously) 3 (VTH monitor VTO Simultaneously) 3 (VTH monitor VTO Simultaneously)
House to House Call Capacity Concurrent Calls to Center 20 To be added 20 To be added 20 To be added 20 To be added -
Concurrent Calls from VTH to VTH 30 30 30 30 20 20 2 1 1 1 1
Concurrent Calls from VTO to VTH 100 100 100 100 -
DMSS Register Count DSS Agile Replace up to 200 or 300 depends on different VTO deivce (need to buy license for each apartment) 30
Simultaneously 8
DSS Agile Register Count 5000 2000 5000 500 5000 2000 5000 500 No Support for DSS Agile
Online Simulta 500 200 500 50 500 200 500 50
Retrieved from "https://DahuaWiki.com/index.php?title=Video_Intercom&oldid=84351"